Training boards

Simplify Your Prototyping

Essential to electronics development, our prototyping boards let you validate your designs quickly and reliably by soldering your components directly onto the board, helping your R&D teams work with greater agility.

Carte d'étude

AL201

HIGH FREQUENCY – SHIELDING

  • Double-sided epoxy board, 1.5 mm thick
  • Non-plated holes
  • Top (Side 1): 2 mm² tinned square pads, Ø 1 mm drilled holes, with DIN 41612 connector footprint
  • Bottom (Side 2): full copper plane for shielding
  • Isolation clearance around holes to prevent short circuits
  • Size: 100 × 160 mm (Eurocard)

AL435

EPOXY – 0.70 mm THICK

  • 35 × 59 grid of 1 mm² SMD pads, Ø 0.35 mm drilled holes
  • 1.27 mm (0,05″) pitch
  • 6 rows at 2.54 mm (0,1″) pitch at each end
  • Fully plated through-holes
  • Size: 53 × 95 mm

AL436

EPOXY – 1.5 mm THICK

  • 40 × 60 grid of 1 mm² SMD pads
  • Ø 0.35 mm drilled holes, 1.27 mm (0,05″) pitch, on both sides
  • 2.54 mm (0,1″) pitch pad pattern: 32 × 2 mm² pads, Ø 1.0 mm drilled holes – DIN 41612 Type C connector footprint
  • Fully plated through-holes
  • Size: 100 × 160 mm (Eurocard)

AL441

EPOXY épaisseur 1,6 mm

  • Entièrement pastillées CMS avec connecteur DIN 41612 C
  • Percage 0,4 mm
  • 2 faces trous métallisés 8475 trous
  • Format 100 x 160 mm

AGB

SINGLE-SIDED – TINNED COPPER STRIPS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • 0.54 mm gap between strips
  • 2 mm wide strips across the entire board
Size (mm)Item
100 x 160AGB10
160 x 200AGB20
160 x 300AGB30

AGP

SINGLE-SIDED – TINNED COPPER PADS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • 2 × 2 mm square pads
  • 0.54 mm gap between pads across the entire board
Size (mm)Item
100 x 160AGP10
100 x 200AGP12
160 x 200AGP20
160 x 300AGP30
160 x 510AGP58

ACB

SINGLE-SIDED – TINNED COPPER – STRIPS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • 0.54 mm gap between strips
  • 2 mm wide strips across the entire board
  • Non-plated holes
    Material: CEM-1
Size (mm)Item
50 x 100ACB5
100 x 160ACB16
100 x 580ACB58

ACP

SINGLE-SIDED – TINNED COPPER – PADS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • 0.54 mm gap between pads
  • 2 × 2 mm square pads across the entire board
  • Non-plated holes
  • Material: CEM-1
Size (mm)Item
50 x 100ACP5
100 x 160ACP16
100 x 220ACP22
100 x 580ACP58

AG611

SINGLE-SIDED – TINNED COPPER PADS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • 2 × 2 mm square pads
  • 0.54 mm gap between pads across the entire board
  • DIN 41612 connector footprint
  • Size: 100 × 160 mm (Eurocard)

AG631

DOUBLE-SIDED – TINNED COPPER PADS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • 2 × 2 mm square pads
  • 0.54 mm gap between pads across the entire board
  • DIN 41612 connector footprint
  • Size: 100 × 160 mm (Eurocard)

AG610

SINGLE-SIDED – FR4 – SINGLE PADS, DOUBLE PADS & STRIPS

  • Drilled at 2.54 mm (0.1″) pitch
  • Ø 1 mm drilled holes
  • Square pads: 2 × 2 mm
  • Round double pads: Ø 2 mm
  • 792 single pads and 363 double pads
  • 37 strips

Downloads

Document ↓